I like it, I try to think of a little bit more serious Names:
Cleanfix
Hoverclean (Hovering Pocket-Pussy reference)
Nukkiclean (Since the most reference ingame to this kind of cleanig Robots leads to Kui-Tan)
There are some ingame text passages about expensive, small cleaning robots that the Kui-Tan and Laquine uses.
I dont rememer all, but this one from Nayna you shoud check.
The Cum on the Body will be vaporized and the Robot-Body is descripted as puck-shaped, invented by Kui-Tan and Laquine scientists.
View attachment 9436View attachment 9437 View attachment 9438
Yours could easily be V2.0 or a Prototype since it can clean the inside of PC body. So the spherical design should not be a Problem.
And since nobody wants to get something inside his Body vaporized*, the sucking Tube-Tentacle design fits.
*(It would look like someone put a fogger in that body orifices, not to mention the risk of injury.
On the other hand, I would like to read the description of how vaporized material escapes from the body orifices
)
Personaly I would mount 2-6 swelling "Bubble Buddy" Orbs in an trap-door-like opening under the Tube-Tentacles, this should result in a clear shape, which invites to improper, abusive actions.
The tentacle-tube-dicks and balls coud stay hidden until the PC activates a "Deep Cleanig" option.
After a quick penetration it coud empty these Orbs, spraying nano-cleaning-whatever deep in the body orifices, leaving them almost flat.
In the meantime the Tentacles swirl inside PC, making sure all spots are clean and the fluids mix together. (Maybe an all through Scene? The tentacle in your Ass detects Leftovers in your mouth XD)
Then the Drone suck the Fluidmix back in the orbs to recycle the nano-cleaning-fluid, swellig them double or triple in size, so big that they hang out of that Trapdoor and swing freely. (maybe the swelling coud be coupled with the amount of Leftover Fluids in Body)
After that the drone pulls back the Tube-Tentacles and beginns loudly to vaporize all Bodyfluid in the Orbs, leaving only the nano-cleaning-whatever inside. During evaporation, fog steam emerges from ventilation openings under the drone.
Yah... someting like that...
For the Lore:
The Maufacturer coud be Tamani Corp, Humphard Inc. or JoyCo. It coud also be an damaged Prototype on Tarkus without a Manufaturer sign (what would make malfunctions interesting again
)
That brigs us to the Vendor or finding location, what do you have in mind?
Shoud the Drone be selled at a Vendor or do the PC stumble over it?